All steel and glass bolt together paneled cab that converts tractors open 4 post ROPS station to an enclosed operators cab. Cab does not meet ROPS requirements and must be used in conjunction with the OEM ROPS/FOPS. Cab includes front safety glass windshield with electric wiper. Full backhoe operation is available from within the enclosure, if the "Rear Panel WITH Backhoe Station Enclosure" option is selected. The left hand hard door and right hand hard side have sliding windows for ventilation.
Cab fits under existing OEM FOPS roof.
Installation Time: (Allow extra time for optional accessories)
Dealer: 8-10 Hours Consumer: 12-14 Hours
Back Panel Removal: The optional rear panel kits, 10-2750S and 10-2749S are secured to the main cab and tractor with 16 bolts. Removal would take approximately 1-2 hours, depending on the kit.
NOTE: A rear panel kit must be selected to fully enclose the rear of the operator station, otherwise the rear of the operator station is left open and exposed to the elements. Also note that the 3 point hitch will not be accessible for all attachments if the Backhoe Station Enclosure is chosen. The Rear Panel WITHOUT the Backhoe Station Enclosure allows for most attachments to work with the 3 point hitch.
SPECIAL FIT-UP NOTES: Although the air-conditioning accessory 600-4242 is listed below for your reference, SIMS CAB DEPOT does NOT recommend any modifications be made to the FOPS structure for installation of this accessory. Any modifications to the vehicle's FOPS structure would void the FOPS certification. The optional Air Conditioning (P/N 600-4242) accessory offered below is for reference only, and is not a guarantee that this accessory fits and works with all tractor and engine combinations. Customer is responsible for ensuring sufficient engine compartment space and engine HP is available for mounting and powering the A/C compressor for their particular tractor and engine configuration.
Heater Note: The optional heater kit offered below does not include the necessary components to connect to a "Turbo" style engine. These components must be purchased separately, part # 17-1199S.
